HOOKS

S-320N     From 3/4 to 40 Tons Rated Working Load New Style S-320N Deformation Indicators-- Two strategically placed marks, on just below the shank or eye and the other on the hook tip, which allows for a Quick-Check™ measurement to determine if the throat opening has changed, thus indicating abuse or overload. To check, use a measuring device (i.d., tape measure) to measure the distance between the marks. The marks should align to either an inch or half-inch increment on the measuring device. If the measurement does not meet this criteria, the hook should be inspected further for possible damage. LATCH NOT INCLUDED. Crosby Eye Hoist Hooks Order These Products Now! Code No Size Description 320A1 1-Ton Alloy Eye Hook 320A112 1 1/2 Ton Alloy Eye Hook 320A2 2 Ton Alloy Eye Hook 320A3 3 Ton Alloy Eye Hook 320A5 5 Ton Alloy Eye Hook 320A7 7 Ton Alloy Eye Hook 320A11 11 Ton Alloy Eye Hook 320A15 15 Ton Alloy Eye Hook 320A22 22 Ton Alloy Eye Hook 320C340 3/4-Ton Carbon Eye Hook 320C1 1-Ton Carbon Eye Hook 320C112 1 1/2 Ton Carbon Eye Hook 320C2 2 Ton Carbon Eye Hook 320C3 3 Ton Carbon Eye Hook 320C5 5 Ton Carbon Eye Hook 320C712 7 1/2 Ton Carbon Eye Hook 320C10 11 Ton Carbon Eye Hook 320C15 15 Ton Carbon Eye Hook Crosby Eye Hoist Hook Dimensions WORKING LOAD LIMIT* (TONS)       DIMENSIONS (IN.)        DEFORMATION INDICATOR CARBON S320N ALLOY S320AN A B C D F G H J K M O P Q T AA 3/4 1 4.42 1.47 3.34 2.83 1.25 .73 .81 .90 .63 .56 .89 2.00 .75 .87 1.50 1 1-1/2 5.07 1.75 3.81 3.11 1.38 .84 .94 .93 .71 .63 .91 2.24 .91 .98 2.00 1-1/2 2 5.64 2.13 4.14 3.53 1.50 1.00 1.16 1.00 .88 .75 1.00 2.50 1.13 1.03 2.00 2 3 6.39 2.41 4.69 3.97 1.63 1.13 .94 .85 1.09 2.82 1.25 1.16 2.00 - - 3 5** 7.90 2.94 5.77 4.81 2.00 1.44 1.63 1.47 1.31 1.13 1.36 3.51 1.56 1.53 2.50 5 7 10.09 3.81 7.37 6.27 2.50 1.81 2.06 1.75 1.66 1.38 1.61 4.52 2.00 1.96 3.00 7-1/2 11 12.43 4.66 9.07 7.45 3.00 2.25 2.63 2.29 1.88 1.63 2.08 5.40 2.44 2.47 4.00 10 15 13.94 5.38 10.08 8.30 3.25 2.59 2.94 2.50 2.19 1.94 2.27 6.00 2.84 2.62 4.00 15 22 17.09 6.63 12.53 10.30 4.25 3.00 3.50 3.30 2.69 2.38 3.02 6.93 3.50 2.83 5.00 20 30 19.47 7.00 14.06 13.62 5.00 3.62 4.62 4.00 3.00 - 3.25 8.78 3.50 3.44 6.50 25 37 24.81 8.50 18.19 14.06 5.38 4.56 5.00 4.25 3.62 - 3.00 11.38 4.50 3.88 7.00 30 45 27.44 9.31 20.12 15.44 6.00 5.06 5.50 4.75 3.72 - 3.38 12.63 4.94 4.75 8.00 40 60 32.31 10.75 23.72 18.50 7.00 6.00 6.50 5.75 4.44 - 4.12 14.81 5.69 5.69 10.00 **New 5 ton Alloy was previously 4 1/2 tons. *NOTE: Eye Hooks (3/4 TC - 22TA), Proof load is 2.5 times Working Load Limit. Eye Hooks (20 TC - 60 TA). Proof load is 2 times Working Load Limit. All carbon hooks - average straightening load (ultimate load) is 5 times Working Load Limit. Alloy eye hooks 1 ton through 22 ton - average straightening load (ultimate load) is 5 times Working Load Limit. Alloy eye hooks 30 tons through 60 tons - average straightening load (ultimate load) is 4.5 times Working Load Limit. All Alloy shank hooks - average straightening load (ultimate load) is 4.5 times the Working Load Limit. All Bronze hooks - average straightening load (ultimate load) is 4 times Working Load Limit. From 3/4 to 40 Tons Rated Working Load Swivel Hooks S-3322 Angle Indicators--Indicates the maximum included angle which is allowed between two (2) sling legs in the hook. These indicators also provide the opportunity to approximate other included angles between two sling legs. U.S. Patents 5,381,650 and 5,193,480 and 5,103,755 and foreign equivalents. Dimension Chart Goes Here S-4320 For New Style 320N Hooks Safety Latch With Hooks From 1/4" to 21/4" G-414 and SS-414 Extra Heavy Wire Rope Thimbles 2 Ton Rated Load at Tip A-378 Sorting Hook Forged Alloy Steel. Quenched and Tempered. Deep straight throat permits efficient handling of flat plates or larg cylindrical shapes. The long tapered points allows easy grab in rings, pear links, eye bolts or lifting holes.. Ultimate Load is 5 times the Working Load Limit.

Many other types and sizes of Rigging Hardware are available. Please call us for more information.